Tipos y principios de funcionamiento de la tecnología táctil todo-en-uno

Jun 17, 2021

Dejar un mensaje

Como uno de los equipos y máquinas modernos de alta-tecnología, la máquina táctil todo-en-está reemplazando lentamente la posición de la pantalla táctil simple, para que los usuarios puedan sentir realmente la Característica que los humanos y las máquinas pueden interactuar libremente.

   Recommended touch all-in-one: horizontal touch all-in-one, wall-mounted touch all-in-one

  The most commonly used types of touch all-in-ones are capacitive touch all-in-one and infrared touch all-in-one;

  The working principle of capacitive touch all-in-one machine:

La pantalla táctil capacitiva de la máquina táctil capacitiva todo-en-una máquina utiliza la corriente de inducción del cuerpo humano para funcionar. La pantalla táctil capacitiva es una pantalla de vidrio compuesto de cuatro-capas. La superficie interna y la capa intermedia de la pantalla de vidrio están recubiertas cada una con una capa de óxido de indio (ITO). Capa protectora de vidrio de silicona fina. El revestimiento de sándwich ITO se usa como superficie de trabajo, se dibujan cuatro electrodos en las cuatro esquinas y el ITO interno se usa como capa protectora para garantizar un buen entorno de trabajo.

   When a finger touches the metal layer, the electric field of the human body and the surface of the user and the touch screen form a composite capacitance. Therefore, for high-frequency current, the capacitance is a direct conductor, and the finger draws a tiny current from the contact point. This current flows from the electrodes at the four corners of the touch screen. The current flowing through the four electrodes is proportional to the distance from the finger to the four corners, and the controller obtains the position of the touch point by accurately calculating the ratio of these four currents.

  The working principle of infrared touch screen all-in-one machine

The infrared touch screen of the infrared touch all-in-one machine uses the dense infrared matrix in the x and y directions to detect the user's touch. The infrared touch screen is equipped with a circuit board frame in front of the display, and the circuit board is equipped with infrared emitting tubes and infrared receiving tubes on the four sides of the screen. , One to one corresponds to a crossed infrared matrix. When the user touches the screen, the finger will block the infrared rays passing through the position, so the position of the touch point on the screen can be judged.

  The structure of the touch one machine

Los principales componentes integrados por el dispositivo táctil todo-en-uno incluyen: marco frontal de aluminio cepillado, marco táctil, vidrio templado, pantalla, carcasa trasera de metal, montaje en pared, computadora industrial ops (o computadora común). ) placa de visualización, placa de fuente de alimentación, placa de expansión, placa decodificadora, cable de alimentación, adaptador de alimentación.

   Touch all-in-one computer: There are two kinds of all-in-one touch computers, one is a common type of computer, and the other is an industrial ops computer. The performance of industrial ops is relatively excellent.

   Tempered glass: Tempered glass is the same as the screen of a mobile phone. Tempered glass plays a role in protecting the touch screen.

  Metal back shell: The metal back shell is necessary to prevent the deformation of the touch all-in-one. If a plastic back shell is used, the entire body is relatively easy to deform.

The all-in-one touch machine produced by Rongda Caijing has always adhered to the three-in-one business philosophy of "hardware production, software research and development, and after-sales service" to provide a full range of solutions. Help enterprises to achieve informatization, intelligence, and humanity Chemical production management helps the development of smart factories and digital factories.


Envíeconsulta