Si subdivide los componentes del módulo LCD, se puede dividir en: polarizador, sustrato de vidrio, matriz negra, filtro de color, película protectora, electrodo común, LCD, espaciador, electrodo de pantalla, TFT, capacitor de almacenamiento, sustrato de vidrio, placa polarizadora, difusor placa, hoja de prisma, placa de guía de luz, tubo de lámpara, placa reflectora.
Además, en sentido estricto, el circuito que acciona el módulo de retroiluminación también es un componente del módulo de cristal líquido LCD.
The most complicated part of the above is the glass substrate, which is composed of two extremely thin glass with a micron-level gap in the middle, which is filled with liquid crystal molecules. Each pixel is an independent liquid crystal cell, and each liquid crystal cell has a micron-level gap. There is a control unit with electrodes connected to the substrate. It should be noted that each pixel here refers to one RGB instead of one RGB. Therefore, the physical resolution of the liquid crystal must be multiplied by 3 to be the real physical Unit pixels, some special ones like Sharp's new "four-color" LCD panel, need to add "Y" (yellow) from RGB, and the physical unit pixels are 4 times the nominal resolution.....So, in the glass There are a large number of extremely thin electrodes and leads on the substrate, which are basically transparent and difficult to distinguish with the naked eye.
